Fire-resistant protection. Full-size coverage. Five rugged patterns. Built for the workers who live around heat, sparks, steel, and long shifts.
The Næxon Bandit FR Bandana takes one of the simplest pieces of jobsite gear and rebuilds it for industrial work.
Made from inherently fire-resistant fabric, the Bandit delivers a generous 24” × 24” size, soft and breathable construction, moisture-wicking comfort, reinforced double-stitched edges, and bold patterns designed for welders, fabricators, oilfield crews, refinery workers, pipefitters, mechanics, and skilled trades.
Wear it beneath compatible welding headgear. Tie it around your neck. Use it as an appropriate head covering. Fold it into the configuration that works for your job.
And unlike ordinary work bandanas, the Bandit is built around FR protection from the beginning.
Available in:
Guns • Black Paisley • Money/Bills • Camo • Skulls & Roses
A Bandana Built for Industrial Work
Bandanas have been part of working-class gear for generations.
Workers use them to manage sweat, cover their heads, protect their necks, and add another layer between themselves and a dirty working environment.
But an ordinary bandana wasn’t necessarily designed for a welder, oilfield worker, or industrial craftsman working around heat and flame hazards.
The Næxon Bandit was.
It takes the versatility of the traditional 24-inch bandana and builds it from inherently FR material intended for demanding industrial environments.
Simple piece of gear.
Different level of purpose.
Inherently Fire-Resistant Fabric
One of the most important features of the Bandit isn’t something you can see.
It’s built into the material.
The Næxon Bandit uses inherently fire-resistant fibers, meaning the flame-resistant characteristics are part of the material itself rather than relying solely on an applied surface treatment.
That matters because this isn’t gear that’s going to sit untouched in a locker.
It’s going to get worn.
Sweated through.
Washed.
Worn again.
For workers who repeatedly use and launder their work gear, inherently FR construction provides long-term flame-resistant characteristics when the product is properly maintained.
NFPA 2112 & ASTM F1506
The Næxon Bandit is represented as meeting NFPA 2112 and ASTM F1506 requirements.
These standards relate to protective clothing used in industrial environments involving thermal and electrical hazards.
For workers in refineries, oil and gas, fabrication, industrial maintenance, and other environments where FR clothing may be required, verified compliance can be an important part of PPE selection.
Always follow your employer’s PPE program and the requirements applicable to the specific hazards of the job.
Certification and compliance claims should be confirmed against the current documentation and labeling for the specific Næxon Bandit before publication or use for PPE selection.
Full 24” × 24” Size
A bandana can have excellent material and still be frustrating if there isn’t enough of it.
Too short.
Too narrow.
Barely enough material to tie.
That’s why the Bandit uses a full 24-inch × 24-inch square design.
The generous dimensions provide enough material for different configurations depending on the worker and task.
Fold it for use beneath compatible headgear.
Tie it around the neck.
Use it as an appropriate head covering.
The extra material gives workers flexibility instead of forcing everyone into one configuration.
Built for Welders
Welding is one of the environments where the difference between ordinary accessories and work-specific gear becomes important.
Your head and neck can spend hours near heat, sparks, welding spatter, and hot steel.
Then add the heat inside the welding hood.
The Bandit provides welders with a breathable FR option that can be configured beneath compatible welding headgear or around exposed areas as appropriate for the job.
Its moisture-wicking construction also helps manage sweat during extended welding sessions.
When you’re several hours into the shift and still have welds ahead of you, that comfort matters.
Built for Oilfield & Refinery Crews
The oilfield doesn’t care how comfortable you are.
Neither does a refinery turnaround.
Long hours.
Hot equipment.
FR clothing.
Hard hats.
Safety glasses.
Dust.
Sweat.
Steel everywhere.
The Næxon Bandit was designed for exactly that type of environment.
Its FR construction makes it a natural addition to industrial workwear systems where flame-resistant apparel is appropriate, while its lightweight design provides versatility for workers spending long shifts in demanding conditions.
Soft, Breathable & Moisture Wicking
Protective workwear has to do more than meet a specification.
Workers actually have to wear it.
The Bandit uses a soft-touch, breathable FR fabric designed to remain comfortable against the skin.
The material helps manage moisture and sweat during long shifts, making it useful in hot environments and underneath compatible protective headgear.
That becomes especially valuable during summer pipeline work, refinery turnarounds, fabrication shifts, and welding operations where heat is already part of the job.
Double-Stitched Edges
A working bandana gets abused.
It’s folded.
Pulled tight.
Tied.
Untied.
Stuffed into a gang box.
Sweated through.
Washed.
Then brought back to work.
The Bandit uses reinforced double-stitched edges designed to resist fraying, stretching, and premature wear from repeated use.
Because the stitching around the edge shouldn’t give up before the worker does.
Fade-Resistant Patterns
The Bandit wasn’t designed to look like generic industrial PPE.
Each version features a bold pattern designed to maintain its appearance through repeated proper laundering.
The fade-resistant print helps keep the design recognizable while the Bandit earns the scars of actual work.
Because protective equipment can do its job without looking like everything else on the jobsite.
Five Patterns. Five Personalities.
GUNS
Bold and unmistakable.
The Guns pattern gives the Bandit a hard-edged industrial look for workers who want their gear to have some personality.
BLACK PAISLEY
The classic bandana.
Rebuilt for the industrial world.
The Black Paisley pattern brings traditional bandana styling to an inherently FR platform built for welders and tradespeople.
MONEY / BILLS
You didn’t come to the shutdown for the scenery.
The Money/Bills pattern gives the Bandit a distinctive look inspired by the reason a lot of craftsmen are putting in twelve-hour shifts in the first place.
CAMO
Rugged, practical styling inspired by equipment built for hard environments.
The Camo Bandit looks at home in the shop, field, pipeline, or industrial jobsite.
SKULLS & ROSES
Hard steel meets classic artwork.
The Skulls & Roses pattern combines industrial attitude with a detailed design for workers who want something different from ordinary workwear.
Key Features
• Inherently fire-resistant fabric
• Full 24” × 24” dimensions
• Designed for welders and industrial workers
• Soft-touch material
• Lightweight and breathable
• Moisture-wicking construction
• Reinforced double-stitched edges
• Designed to resist fraying and premature wear
• Fade-resistant patterns
• Machine washable according to product care instructions
• Versatile head and neck configurations
• Designed for repeated industrial use
• Available in five patterns
• Guns, Black Paisley, Money/Bills, Camo, and Skulls & Roses
Product Specifications
Product: Bandit FR Bandana
Brand: Næxon
Dimensions: 24” × 24”
Material: Inherently fire-resistant fabric
Construction: Double-stitched edges
Comfort: Soft, breathable and moisture wicking
Care: Machine washable according to product care instructions
Fit: Men & Women / Unisex
Patterns: Guns / Black Paisley / Money-Bills / Camo / Skulls & Roses
Primary Applications: Welding, fabrication, oilfield, refinery, industrial maintenance and skilled trades
Built for the Skilled Trades
The Bandit isn’t limited to one craft.
It’s designed for the people working where industrial PPE is part of everyday life.
Welders.
Pipefitters.
Fabricators.
Oilfield crews.
Refinery workers.
Boilermakers.
Ironworkers.
Millwrights.
Mechanics.
Industrial maintenance crews.
Power plant workers.
Different trades.
Same environment.
Heat, steel, dirt, sweat, and long hours.
Under the Welding Hood
Ask a welder what happens inside a hood after hours of burning rod.
It gets hot.
Sweat builds.
And whatever you’re wearing underneath that hood starts to matter.
The Bandit’s soft, breathable material provides a comfortable layer against the skin while helping manage moisture during extended welding sessions.
Its full-size 24” × 24” construction gives the welder enough material to fold and configure the Bandit according to personal preference and compatible equipment.
When used beneath welding headgear, make sure it does not interfere with the fit or protective function of the hood.
Around the Neck
The neck can be an uncomfortable place to catch heat, sparks, sun, dirt, and debris.
The Bandit’s full-size construction allows it to be tied around the neck for appropriate work applications.
That makes it a versatile piece of industrial workwear that can change configuration as the job changes.
Under the hood in the morning.
Around the neck later.
One Bandit.
Different jobs.
Under the Hard Hat
Workers may also use the Bandit as an appropriate head covering beneath compatible protective headgear.
The breathable, moisture-wicking material can help manage sweat and provide a softer layer between the worker and headgear during long shifts.
Anything worn beneath a hard hat must not interfere with its suspension, fit, stability, or protective performance.
Always follow the hard-hat manufacturer’s instructions.
Næxon Expert Guide: FR Bandana vs. Ordinary Cotton Bandana
They may look similar.
They’re built for different environments.
An ordinary cotton bandana can absorb sweat and provide basic coverage, but cotton is a combustible material and isn’t automatically appropriate for environments requiring flame-resistant clothing.
The Næxon Bandit is built from inherently FR material specifically for workers operating around industrial hazards where flame-resistant workwear may be appropriate.
That doesn’t make the Bandit a replacement for required PPE.
It means the bandana itself is designed around the environment where it’s being worn.
If you’re already wearing FR clothing because of the hazards around you, it makes sense to consider what you’re putting around your head and neck too.
Made for 12-Hour Shifts
Industrial equipment doesn’t get judged during the first ten minutes of a shift.
It gets judged ten hours later.
When you’re hot.
When you’re sweating.
When your gear has been on all day.
When you’ve already tied and adjusted it more times than you remember.
The Bandit’s breathable construction helps manage heat and moisture.
The double-stitched edges help withstand repeated use.
The 24” × 24” dimensions give you room to configure it properly.
And the inherent FR characteristics remain part of the material when properly cared for.
That’s what matters when gear is expected to work shift after shift.
Machine Washable
Work gear gets dirty.
The Bandit is designed to be machine washable according to its supplied care instructions.
Because the flame-resistant characteristics are inherent to the material, they are not dependent solely on a topical FR treatment that is intended to wash away.
Proper laundering remains essential.
Avoid products or processes prohibited by the manufacturer’s FR care instructions, and keep FR equipment free from flammable contamination.
Care & Maintenance
Inspect the Bandit regularly for damage, contamination, holes, tears, excessive wear, or deteriorated stitching.
Machine wash according to the product’s care label.
Do not use bleach, fabric softeners, or other laundry products if prohibited by the supplied FR care instructions.
Keep the material free from oils, fuels, grease, and other combustible contaminants.
If contamination cannot be properly removed, or the fabric becomes damaged enough to compromise its intended protection, remove the Bandit from service.
Frequently Asked Questions
What size is the Næxon Bandit?
The Bandit measures a full 24 inches × 24 inches, providing enough material for multiple appropriate wearing configurations.
Is it actually fire resistant?
The Bandit is made from inherently fire-resistant fabric, meaning its FR characteristics are built into the material rather than relying solely on a topical treatment.
Will the FR properties wash out?
The FR characteristics are inherent to the fabric and are not designed to wash away like an applied treatment. Proper care and laundering remain essential.
What patterns are available?
The Bandit is available in Guns, Black Paisley, Money/Bills, Camo, and Skulls & Roses.
Can welders wear it?
Yes. The Bandit is designed with welders among its intended users. It may be configured with compatible welding PPE as appropriate for the job.
Can I wear it under my welding hood?
It can be worn beneath compatible welding headgear when configured so that it does not interfere with the fit or protective function of the equipment.
Can I wear it around my neck?
Yes. Its 24” × 24” dimensions allow it to be tied around the neck for appropriate applications.
Is it breathable?
Yes. The material is designed to be lightweight, breathable, soft, and moisture wicking for greater comfort in hot working environments.
Are the edges reinforced?
Yes. The Bandit uses reinforced double-stitched edges designed for durability and resistance to fraying.
Can I machine wash it?
Yes. Machine wash according to the supplied product care instructions.
Is the Bandit only for welders?
No. It’s designed for welders, oilfield workers, pipefitters, fabricators, refinery crews, mechanics, maintenance workers, and other industrial trades where FR workwear is appropriate.
Safety Information
The Næxon Bandit is supplemental protective workwear, not a substitute for required PPE.
Always use appropriate FR or arc-rated clothing, welding helmets, hard hats, eye and face protection, gloves, respiratory protection, and other PPE required by the task and workplace.
Never configure the Bandit in a way that obstructs vision, breathing, hearing, or the operation of protective equipment.
Do not allow the Bandit to interfere with a respirator seal, welding hood, hard-hat suspension, or other safety equipment.
Follow your employer’s PPE requirements and equipment manufacturer instructions.
The Bandit
Some pieces of work gear are complicated.
This isn’t one of them.
It’s a 24” × 24” square of inherently FR material built for the men and women working around heat, sparks, steel, dirt, and long shifts.
Make it breathable.
Make it comfortable.
Double stitch it.
Give workers enough material to actually use it.
Then give it some attitude.
Guns.
Black Paisley.
Money.
Camo.
Skulls & Roses.
Pick your Bandit.
Tie it down.
Drop the hood.
Get to work.
NÆXON — BUILT FOR THE HARDEST WORKERS ON EARTH.
