NÆXON INDUSTRIES
Industrial Pipefitting
Follow the work from fundamentals and field math to fabrication, installation, testing, and turnover.
One email. Every course.
Subscribe free to unlock the full Næxon course library. No password. No payment.
10 LESSONS
Industrial Pipefitting
Follow the work from fundamentals and field math to fabrication, installation, testing, and turnover.
View lessonLESSON 01
Pipefitting Fundamentals
Start industrial pipefitting with NPS, OD, ID, wall thickness, schedule, materials, centerlines, and basic measurements.
View lessonLESSON 02
Fiings, Flanges & Valves
Learn how elbows, tees, reducers, flanges, and valves build industrial piping systems and affect layout and takeoff.
View lessonLESSON 03
Pipefitter Math: Measurements, Fractions, Triangles & Field Calculations
Learn practical pipefitter math for fractions, fitting takeoffs, right triangles, offset travel, and centerline measurements.
- View lesson
LESSON 04
Pipefitting Tools, Layout & Field Measurement
Learn how pipefitters use tapes, levels, squares, and control references to transfer dimensions into accurate field layout.
- View lesson
LESSON 05
Piping Drawings, Isometrics, P&IDs & Reading the Job
Learn to read piping isometrics, plans, P&IDs, dimensions, elevations, and symbols in Part 5 of the pipefitter course.
- View lesson
LESSON 06
Pipe Fabrication, Fit-Up, Tack-Up & Preparing Joints for Welding
Learn spool fabrication, joint preparation, fit-up, bevels, root gaps, tack-up, and flange orientation before welding.
- View lesson
LESSON 07
Pipe Offsets, Rolling Offsets, 45s & Advanced Field Layout
Learn simple and rolling offsets, 45-degree calculations, and right-triangle geometry for industrial pipe layout.
- View lesson
LESSON 08
Flanges, Bolt-Up, Gaskets, Alignment & Final Connections
Learn flange alignment, gasket selection, bolt-up basics, and final piping connections in Part 8 of the pipefitter course.
- View lesson
LESSON 09
Pipe Supports, Hangers, Anchors, Guides & Thermal Movement
Learn how hangers, anchors, guides, and springs support industrial piping while managing weight and thermal movement.
- View lesson
LESSON 10
Final Installation, Testing, Turnover & Troubleshooting
Finish the pipefitter course with system installation checks, testing, inspection, reinstatement, turnover, and troubleshooting.