NÆXON INDUSTRIES
220 articles
A proper piping walkdown compares drawings with actual field conditions before fabrication or installation begins. It helps identify references, tie-ins, elevations, obstacles, access and sequencing needs.
Read article →Nitrogen purging replaces an unwanted atmosphere inside piping before startup or maintenance. This guide covers planning, boundaries, valve lineup, venting, monitoring, acceptance and oxygen-deficiency hazards.
Read article →Draining removes bulk hydrotest water, but moisture remains on pipe walls and in low points, branches and valves. Drying continues until the approved moisture or dew-point criterion is met.
Read article →Steam blowing uses controlled high-energy steam to remove construction debris from steam piping before it can damage turbines or other equipment. It requires engineered temporary systems and strict exclusion controls.
Read article →An air blow uses controlled compressed-air flow to remove loose debris from piping that should remain dry. Proper procedures address stored energy, temporary connections, restraints, discharge hazards and acceptance c…
Read article →Piping flushing moves an approved fluid through a defined system to remove construction debris before startup. Effective flushing protects pumps, valves, instruments, seals and other sensitive equipment.
Read article →Pneumatic testing uses compressed gas and carries greater stored-energy risk than hydrotesting. This guide explains engineered test boundaries, staged pressure increases, monitoring, restricted access and depressuriza…
Read article →Leak testing checks whether completed piping can contain its test medium without unacceptable leakage. The approved procedure defines the medium, pressure, inspection method, duration and acceptance criteria.
Read article →A professional hydrotest verifies a defined piping pressure boundary under controlled conditions. This field guide covers planning, test limits, filling, venting, staged pressurization, inspection, documentation and r…
Read article →During a hydrotest, water loads the entire pressure boundary while pipe walls stretch microscopically, flange bolts and gaskets resist separation, trapped air compresses and temperature affects gauge pressure.
Read article →Structural steel drawings locate columns, beams, bracing, platforms, stairs, pipe racks and equipment supports. This guide explains plans, sections, details, grids, elevations and member identification.
Read article →Thermal expansion depends on pipe length, material and temperature change. This guide explains the basic formula and examples while showing why anchors, guides, loops and flexible supports matter.
Read article →